The basic form of DMC series five-axis machining center is vertical type, the worktable is cradle structure, with five-axis five-linkage function, with efficient drilling, milling, boring, rigid tapping and other processing functions, can complete the nozzle ring Laval hole drilling, Milling and reaming, the equipment has high rigidity, high shock resistance, high precision, and good thermal stability, and can reliably complete rough and finish machining of high-precision parts. The equipment is easy to use, operate and maintain, with beautiful appearance and excellent after-sales service.
The DMC650U five-axis machining center adopts a five-axis bridge-type vertical frame layout (as shown in the figure below). The high-rigidity bed and the column form a U-shaped frame structure. The beam moves forward and backward along the column (Y axis), and the slide moves laterally along the beam ( X axis), the ram moves up and down along the slide (Z axis), the turntable tilts and rotates along the X axis -120°～+120° (A axis), and the turntable surface rotates 360° along the Z axis (C axis). The bed, column, beam, slide, ram and other large parts are all made of high-strength Meehanna castings. These large parts are designed with the aid of 3D computer software, with reasonable arrangement of ribs and perfect heat treatment process to eliminate residual stress. Ensure that the whole machine has sufficient strength, rigidity and high stability.
